README.TXT

This file discusses the latest version of the M2Config software.

Title:        	M2Config
Version:      	3.18.0
Release Date: 	11 July 2011


The M2Config software has the following minimum system requirements: 
	
	- Personal computer running Windows XP, Vista, or 7 with the 
	  most current updates installed.
	- Pentium® II processor, 400 MHz or higher 
	- 128MB RAM or higher 
	- 10MB free hard disk space  
	- Microsoft® Internet Explorer 6.0 or higher
	- Mouse or other compatible pointing device
	- Supported communication device (serial port, modem, or Ethernet Network) 
	- One or more Venus 1500-compatible displays installed

********************************************************************************************

1.0 	New features in this release
	1.01	Added custom translation table upload support for the following module 
		types: AF-3500 Custom, and AF-3700 with MLCs.

	1.02	Added Interleave Support for the following module types: AF-3500 Custom,
		and AF-3700 with MLCs.
	
	1.03	Added color correction support for the following module types: AF-3500 Custom,
		and AF-3700 with MLCs.

	1.04	Added module type "Galaxy 20mm 3400 to 3500 series control system retrofit"
		for RGB Galaxy displays.

	1.05	Added module type "Galaxy 34mm 3400 to 3500 series control system retrofit"
		for RGB Galaxy displays.

	1.06	Added module type "AF-6300; 8 hi; multi-line; 12mm; SF" for Monochrome displays.

	1.07	Added module type "AF-6300; 8 hi; multi-line; 12mm; DF" for Monochrome displays.

	1.08	Added module type "AF-6300; 8 hi; multi-line; 8mm; SF" for Monochrome displays.

	1.09	Added module type "AF-6300; 8 hi; multi-line; 8mm; DF" for Monochrome displays.

	1.10	Added module type "AF-6120 quad rg; 8mm" for Tricolor displays.

	1.11	Added module type "AF-6120 quad rg; 8mm; 2V" for Tricolor displays.

	1.12	Added module type "AF-6200 rg; 8mm; 2V"	for Tricolor displays.

	1.13	Added module type "AE-3010 rg; 8mm" for Tricolor displays.

	1.14	Added module type "AE-3010 rg; 8mm; 2V" for Tricolor displays.

	1.15	Added module type "AF-6120 quad 2in1; 8mm" for Tricolor displays.

	1.16	Added module type "AF-6120 quad 2in1; 8mm; 2V" for Tricolor displays.

2.0 	Bug fixes in this release

3.0	Known Issues
	3.01	During a firmware update, it is possible that M2Config will not be able to 
		reconnect after completing an automatic update. If this happens a dialog 
		will be shown that says "The firmware update could not be confirmed.  Another
		firmware update may be required to fully update your controller." This dialog
		may be shown even if the upload was completed successfully.
		
		 
********************************************************************************************


Copyright (c) by Daktronics, Inc. 2003

Venus, DataTrac, InfoNet, Galaxy, GalaxyPro, SunSpot and Glow Cube are
trademarks or registered trademarks of Daktronics, Inc.

Windows is a trademark of Microsoft Corporation.