This image was saved from this machine with hard drive S.M.A.R.T. info at 2025-1001-1959: *****************************************************. For the drive: /dev/sda smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.12.32-amd64] (local build) Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: SSD50300S00261T0 Serial Number: LE1804231003DE4D2 LU WWN Device Id: 5 888914 1003de4d2 Firmware Version: 60KABBF0 User Capacity: 30,016,659,456 bytes [30.0 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device TRIM Command: Available Device is: Not in smartctl database 7.3/5528 ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Oct 1 19:59:48 2025 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0033 095 095 050 Pre-fail Always - 4009516 5 Reallocated_Sector_Ct 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours 0x0032 031 031 000 Old_age Always - 61092 (2 4 0) 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 194 13 Read_Soft_Error_Rate 0x0032 095 095 000 Old_age Always - 4009516 100 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 5128 170 Unknown_Attribute 0x00a8 000 000 000 Old_age Offline - 3712 171 Unknown_Attribute 0x000a 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0030 000 000 000 Old_age Offline - 28 177 Wear_Leveling_Count 0x0000 000 000 000 Old_age Offline - 0 181 Program_Fail_Cnt_Total 0x000a 100 100 000 Old_age Always - 0 182 Erase_Fail_Count_Total 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x005c 100 100 090 Old_age Offline - 0 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0000 028 033 000 Old_age Offline - 28 (Min/Max 6/33) 194 Temperature_Celsius 0x0022 028 033 000 Old_age Always - 28 (Min/Max 6/33) 195 Hardware_ECC_Recovered 0x001c 120 120 000 Old_age Offline - 4009516 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 198 Offline_Uncorrectable 0x0010 120 120 000 Old_age Offline - 50766513438720 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 0 201 Unknown_SSD_Attribute 0x001c 120 120 000 Old_age Offline - 4009516 204 Soft_ECC_Correction 0x001c 120 120 000 Old_age Offline - 4009516 230 Unknown_SSD_Attribute 0x0013 100 100 000 Pre-fail Always - 100 231 Unknown_SSD_Attribute 0x0013 100 100 010 Pre-fail Always - 0 232 Available_Reservd_Space 0x0032 000 000 000 Old_age Always - 3 233 Media_Wearout_Indicator 0x0032 000 000 000 Old_age Always - 7189 234 Unknown_Attribute 0x0032 000 000 000 Old_age Always - 5454 241 Total_LBAs_Written 0x0032 000 000 000 Old_age Always - 5454 242 Total_LBAs_Read 0x0032 000 000 000 Old_age Always - 1051 SMART Error Log not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. The above only provides legacy SMART information - try 'smartctl -x' for more